Results for park tool crank extractor tool
Park Tool Crank Extractor - CCP44The CCP-44 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks Features:Specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that...
Click For Info
The Park Tool Adjusting Cap Tool removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized...
Click For Info
Park Tool Crank Wrench CCW5The CCW-5 features both a 14mm socket and 8mm hex wrench on a long, comfortable handle Buy Park Tool Crank Tools from Chain Reaction Cycles, the Worldâs Largest Online Bike Store.
Click For Info
Park Tool Bottom Bracket Tool - Hollowtech IIThe BBT-9 is used to remove and install external bearing bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap. The BBT-9...
Click For Info
14 mm socket and 8 mm hex wrench on a long, comfortable handleSuitable for many common square taper crank bolts8 mm hex can also be used to install Shimano SPD and SPD-SL pedals that feature an 8 mm hex bolt axle design
Click For Info
14 mm socket and 8 mm hex wrench on a long, comfortable handleSuitable for many common square taper crank bolts8 mm hex can also be used to install Shimano SPD and SPD-SL pedals that feature an 8 mm hex bolt axle design
Click For Info
Park Tool Tyre Seating Tool PTS1This tool is designed to quickly and easily âseatâ stubborn tires. During inflation, tire beads often slip below the rim edge and are difficult to pull out Simply place the non-slip jaws on the tire and lift out. The Park Tool Tire Seater adjusts to various...
Click For Info
Park Tool Carbon Replacement Chain Tool Pin Kit CTP4KThis is a replacement pin kit for the CT-4, CT-4 2, CT-4 3, CT-11 tools. It includes four (4) replacement chain tool pins and one 5/32\" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose...
Click For Info
Park Tool Valve Core Tool VC1The VC1 is a small, handy tool that is designed to remove and install Schrader and Presta valve cores and to remove and install Presta valve extenders with 5mm wrench flats. It is made from CNC aluminium finished in Pak Tool blue and built to last Note: Not all...
Click For Info
Park Tool Advanced Mechanic Tool Kit AK2Designed specifically for the home mechanic who wants the best, the AK-2 Advanced Mechanic Tool Kit is a special collection of Park Tool\'s finest tools, all housed in a tough toolbox. The AK-2 includes over 40 tools to work on a wide variety of current model...
Click For Info
Park Tool Bottom Bracket Tool BBT4The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup The handle of the BBT-4 is vinyl coated for comfort. The major...
Click For Info
Park Tool Hex Wrench Tool - HTAs a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools\' many years of experience. The world\'s largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world Features:Specially designed...
Click For Info
Park Tool Hex Wrench Tool - HTAs a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools\' many years of experience. The world\'s largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world Features:Specially designed...
Click For Info
Park Tool Bottom Bracket Tool BBT49This is a precision CNC machined aluminium tool for the installation and removal of 16-notch external bearing bottom brackets with an outside diameter of 39mm. It is anodised for easy identification and features a ratchet/torque wrench compatible 3/8\" drive....
Click For Info
Park Tool Bottom Bracket Tool BBT59This is a precision CNC machined aluminium tool for the installation and removal of 16-notch external bearing bottom brackets with an outside diameter of 41mm. It is anodised for easy identification and features a ratchet/torque wrench compatible 3/8\" drive....
Click For Info
Park Tool Bottom Bracket Tool BBT29The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e g. Shimano® Dura-Ace® 9000 series and XTR® 980 series) as well as 16-notch bearing cups with an outside diameter of 48 5mm (e g....
Click For Info
Park Tool Cassette Lockring Tool FR-5CHeat-treated alloy tool steel, one-inch base fits wrench or bench vice. Thin wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23 4mm across Features: Fits Shimano®, SRAM®, SunRace®,...
Click For Info
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts Fits Suntour 2 Pin (FR-2): Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across...
Click For Info
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts Fits Suntour 2 Pin (FR-2): Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across...
Click For Info
Park Tool Freewheel Remover Tool - FRHeat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts Fits Suntour 2 Pin (FR-2): Fits older Sun Tour® two notch freewheels Two notches are approximately 25mm across...
Click For Info
Park Tool Bottom Bracket Tool BBT22The BBT-22 is a shop quality tool for installing and removing Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup...
Click For Info
Park Tool Cassette Lockring Tool FR-5GTThe FR-5GT is designed specifically for use when removing and installing cassette lock rings from thru axle hubs Features: Part of a comprehensive range of freewheel removal tools The FR-5GT is designed specifically for use when removing and installing...
Click For Info
Park Tool Folding Chain Tool CT-6 3Now 11-speed compatible, the CT-6. Smooth and powerful, this handy take along is encased in a stainless steel shell,  which becomes a comfortable handle when opened Also included is a peening anvil that allows for peening of Campagnolo® 11-speed...
Click For Info
Specially designed for cranks Freehubs and pedals the hex tool is built for speed leverage and comfortThe dual density ergonomically designed screwdriver handle provides secure grip and is moulded over an extra long extra deep super strong hexAlso features an additional ball-driver for those really...
Click For Info
Specially designed for cranks Freehubs and pedals the hex tool is built for speed leverage and comfortThe dual density ergonomically designed screwdriver handle provides secure grip and is moulded over an extra long extra deep super strong hexAlso features an additional ball-driver for those really...
Click For Info
The CT-4.3 is a powerful, precise tool designed to quickly and accurately remove and install chain rivets. Without a doubt the most accurate chain tool weâve ever built.
Click For Info
Seats tyre beads into rim quickly and easilyLong vinyl coated handles give plenty of leveragePerfect for tubeless tyres, or stubborn downhill tyre and rim combinationsMake workshop life even easier on your thumbs
Click For Info
Seats tyre beads into rim quickly and easilyLong vinyl coated handles give plenty of leveragePerfect for tubeless tyres, or stubborn downhill tyre and rim combinationsMake workshop life even easier on your thumbs
Click For Info
Sturdy stainless steel construction and fold out handles make light work of even the tightest pins. The handles completely enclose the chain cradle when folded so no more chain gunk stains on the pocket of your favourite merino jersey.
Click For Info
X-Tools Crank Extractor Tool X-Tools crank extractor tool for removing standard Square Taper and ISIS type cranks Features: Fits: Square Taper ISIS Cranks Buy X-Tools Products from Chain Reaction Cycles, the Worldâs Largest Online Bike Store.
Click For Info
The benchmark crank puller of the cycle industry for over 25 yearsThe CCP-22 uses a long comfortable handle and extra fine thread that provides the leverage required to remove even the tightest cranksUnique floating-tip design hasbeen updated over the CCP-2 and ensures even smoother operation and...
Click For Info
The benchmark crank puller of the cycle industry for over 25 yearsThe CCP-22 uses a long comfortable handle and extra fine thread that provides the leverage required to remove even the tightest cranksUnique floating-tip design hasbeen updated over the CCP-2 and ensures even smoother operation and...
Click For Info
The X-Tools Crank Extractor tool is an essential tool for any home or workshop mechanic.
Click For Info
The Park Tool CBP-5 Crank and Bearing Adaptor Set is used in conjunction with the CBP-3 set to remove and install Power Torque™ crank arms and right side crank bearings. Park Tool CBP-5 Crank and Bearing Adaptor Set Features To be used in conjunction with the Park Took CBP-3 bearing puller to...
Click For Info
The Park CWP-7 Crank Wrench Puller is the perfect addition to any workshop. The CWP-7 is a compact crank puller workshop tool with a built-in 8mm hex for removing crank bolts. Includes two rotating tips (11.3 mm and 16.3 mm) so it can be used to remove splined Octalink and ISIS Drive crank arms, as...
Click For Info
The Park Tool Crank Bolt Wrench 14mm socket and 8 mm hex wrench is the ideal convenient wrench on a long, comfortable handle, perfect for any budding mechanic. Park Tool Crank Bolt Wrench Features 14 mm socket and 8 mm hex wrench on a long, comfortable handle Suitable for many common square taper...
Click For Info
Park Tool Compact Crank Wrench and Puller CWP-7The universal design of the CWP-7C has a rotating tip pressed into each end of the tool (11 3mm and 16 3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms. Features:Weight - 0.5lbsBuy Park Tool Compact Crank Wrench...
Click For Info


