Results for laser laser 4771 engine timing tool set
For use on: Volkswagen Touareg and Transporter 2.5 TDI PD models with engine code: BAC, BLK, BPD, AXD, AXE, BLJ, BNZ, BPC (03-) plus 4.9/TDI PD models with engine code: AYH (03-) These engines are gear driven but the injection timint is controlled via the camshaft followers. Download Instructions
Click For Info
This comprehensive set of tools enables the correct engine timing to be made when replacing the timing belt. Suitable for use on the most recent cars with either HPi(Petrol or HDi (Diesel) engines . C038 Crankshaft Timing Pin 6mm, C039 Camshaft/Crankshaft Timing Pins (2), C040 Camshaft Timing Pins...
Click For Info
This engine timing tool kit is suitable for Ford Focus 1.4, 1.6 TDCi chain engines with codes G8DA, G8DB, HNDA 2004-2006. The kit includes camshaft alignment tool, crankshaft alignment tool and crankshaft locking tool.
Click For Info
Camshaft setting/locking plates are used to accurately align a datum slot, located in the end of the camshaft, with the top face of the camshaft housing to hold the camshaft at the (TDC) Top Dead Centre position. Locking pins are designed to pass through datum holes in the timing belt pulleys into...
Click For Info
This kit of three tools enables the correct engine timing to be performed on Renault K4J, K4M, F4P, F4R engines when changing the timing belt.
Click For Info
This set of timing tools enables the correct timing position to be held when servicing GM 2.2 litre petrol and diesel engines plus 2.5DCi engines. Also for use on some Renault engines.
Click For Info
This 5 piece set contains essential engine service tools for use with BMW N51, N52, N53 & N54 litre petrol engines. Compatible with a wide range of engine codes, this set ensures that the engine timing is set correctly using the specialist tools. Engine timing must be set correctly to ensure an...
Click For Info
Engine Timing Tool, Engine Setting/Locking Tool, Camshaft Locking Tool, Car Tool Set, Timing Belt Tensioner
Click For Info
Engine timing tool set for Rover 2.0, 2.5 V6 petrol engines as fitted to Rover 825, 45, 75 plus Land Rover Freelander, MGZT160 and 180.This comprehensive set covers all KV6 variants. Packed in a modular tray for storage in workshop drawers.
Click For Info
This set of tools allows the user to check and adjust the Camshaft timing, remove and replace the Cam chain and perform complete engine rebuilds whilst maintaining the correct valve timing. Applications: Punto (03-07), Panda (03-09), Idea (04-06), Doblo (04-06) and Doblo Cargo (04-06) with...
Click For Info
Exhaust camshaft alignment tool (11 9 291/3), Inlet camshaft alignment tool (11 9 292), flywheel timing pin (11 5 120), sensor gear alignment tool (11 9 350), timing chain pre-tensioning tool (11.9.340), thumbscrew M8 x 1.25 x 20 (11 9 293), for 118i/120i (E87), 318i/320i (E90) and Z4 2.0 (E85)...
Click For Info
Comprehensive engine timing tool set for Italian cars. Includes 24 tools for camshaft alignment, tensioning and crankshaft alignment to cover a wide range of petrol and diesel engines packed in a metal case. Please see the Product Manual for full details. Download Product Manual
Click For Info
An engine timing tool kit specifically introduced for the current generation of BMW 2.0 diesel engines (N47 & N47S) produced from 2007 - 2010. The kit includes everything you need including the Pump Pulley Removal Tool and other components, important for servicing a BMW 2.0 diesel engine.
Click For Info
Piston height gauge, camshaft setting tools and tensioning tool for use on the latest 1.2 16v Fiat engines including Bravo/Brava/Punto/Stilo with engine codes 176 B9 000, 182 B2.000 & 188 A5.000. Piston Height Gauge - Pair OEM 1 860 992 000. Camshaft Setting Tools (2) OEM 1 860 985 000, Tensioning...
Click For Info
Essential timing tools for setting and locking camshafts and crankshafts on a wide range of popular petrol and diesel engines. Suitable for Single Overhead Cams (SOHC) and Double Overhead Cams (DOHC) often referred to as Twin Cams where multi valves are used Download Instructions
Click For Info
A special four piece kit containing the necessary special pins required to lock the camshaft sprocket, flywheel and align the crankshaft and fuel pump when checking the valve timing on 2.0 & 2.4 litre chain driven engines and or replacing the timing belt on 1.4 litre engines.
Click For Info
Setting and locking set for BMW Vanos engines. Includes set-up bracket to time camshafts, 2 chain tensioner locking pins, secondary sprocket, Vanos checking and primary chain pre-tension tools. Applications - BMW 528i, X5, E46, Z3, Z4, 325, 525 with M52, M54 and M56 engines.
Click For Info
This kit sets the valve timing on the DW10 and DW12 Diesel Fiat and PSA (Peugeot & Citroen) ranges. Specifically manufactured for use on twin cam systems, with one camshaft driven by the cambelt and the other shaft driven by the chain in the head, this essential service kit is compatible with 2...
Click For Info
Camshaft alignment pin (KM 6340) and tensioner locking pin (KM 6333) for Vauxhall/Opel, Astra-G, Astra-H, Meriva (VXR), Zafira-B 1.6 16v with engines Z16LET, Z16XEP 2003-2007.
Click For Info
Engine timing tools set for General Motors/SAAB V6 petrol engines. 6 pieces, (Crankshaft and Camshaft Locking Tools sold separately). Included in the Set... RH Camshaft Locking Tool (Red) (Part No 3132), LH Camshaft Locking Tool (Green) (Part No 3133), Crankshaft Locking Tool (Part No 3115),...
Click For Info
This 7 piece set contains essential engine service tools for use with BMW N43 1.6 & 2.0 litre petrol engines. Compatible with a wide range of engine codes, this set ensures that the engine timing is set correctly using the specialist tools. Engine timing must be set correctly to ensure an engine...
Click For Info
This new set of tools enables the correct valve timing on the popular BMW Mini 1.6 turbo petrol engines with engine codes N14/R56. These tools can also be used with other popular models such as the Citroen C4, Peugeot 207 and Peugeot 308 models baring EP6 DT/DTS engine codes. This tool set is a...
Click For Info
Timing Tool Set for Renault 16v engines. Includes Camshaft Setting Tool, Tensioning Tool for auxiliary drive belt and Crankshaft TDC Timing Pin for: Laguna/Safrane/Sarane 2.0/2.5 16v 1996-2001 engines.
Click For Info
Crankshaft Locking Pin | Camshaft Clamp Assembly (Twin Cam) | Camshaft Timing Tool Petrol & Diesel | Primary Timing Chain Pre-Load Tool | VANOS Unit Engagement Wrench | Bushes | Tensioner Locking Pins. This comprehensive set of tools enables the correct timing positions to be achieved on both...
Click For Info
An engine timing locking tool set for Fiat Ducato 2.3 JTD with engine codes... F1AE0481C, F1AE0481D, F1AE0481N 2002, 2006
Click For Info
Manufactured for use with BMW M62 VANOS engines, this timing tool kit is an essential service tool that will also work with Range Rover 4.4 litre engines fitted between 03 & 05 and also M60 engines. This is a comprehensive kit, a must have for engine servicing and timing adjustments.
Click For Info
Engine timing locking tool kit from Laser designed specifically for Chrysler Common Rail Diesel engines fitted to Chrysler Voyager, Grand Voyager and LDV Maxus models.
Click For Info
This kit sets the valve timing on a range of 1.2 and 1.4 litre petrol engines fitted to various Fiat, Alfa Romeo and Lancia models. This is an essential service tool, a must have, easy to use kit that ensures engine timing is kept accurate, allowing the motor to run correctly and more efficiently...
Click For Info
Comprehensive timing tool set for Honda, Mazda, Daewoo, Hyundai, Subaru and Chevrolet. Full OEM details and application list are included. Download Product Manual
Click For Info
Timing Belt Tensioner / Timing belt tensioner for Alfa Romeo V6 24v engines OEM no 1 860 950 000. Application includes 156 / 166 2.5 / 3.0 V6 24v engines (1997-2002) and GTV 2.0 V6 24v engines (1997-2002) with engine codes 161-02, 324-01, 342-01, 343-01, 932A.000
Click For Info
This set of timing tools enables the correct timing position to be made when servicing GM Ecotec 2.0 engines.
Click For Info
This set of tools enables the correct timing to be made when servicing the GM CHAIN engines 1.0 12v X10XE and 1.2 16v X12XE as fitted to Opel Agila and Corsa models.
Click For Info
For use on the popular petrol engines to enable the timing pulleys to be locked into place whilst servicing the camshaft and cam-belt replacement.
Click For Info
Developed for late Vauxhall/Opel & Chevrolet 2.0 common rail diesel engines, this kit holds the correct position of the camshafts and crankshaft whilst changing the timing belt on SOHC 16v engines.
Click For Info
This new product utilises a patented design to quickly produce high quality SEA and DIN flares on or off of the vehicle. The tool works on Cupro-Nickel and Steel pipes as well as coated steel piping. The set incorporates the tools to flare 4.75mm, 5mm and 6mm pipes by using the correctly sized die...
Click For Info
The Laser Diesel Engine Timing & Locking Tool Kit 2246 is a set of essential tools for setting and locking the camshaft and crankshaft when changing the timing belt on a wide range of diesel engines. The kit contains parts from Laser 1866, 1867, 1868, and 1869 Diesel Timing Kits, and is part of the...
Click For Info
A set of essential engine timing locking tools for holding the camshaft and crankshaft in timing position when changing the timing belt on Renault engines with codes - L7X 700, 701, 713, 727, 731, XFZ and ES9J4 engines. Includes... Camshaft/Crankshaft Timing Pins OEM No MOT 1430, Timing Pin Gauge...
Click For Info


