Results for kemo m142 led contant current source module
This LED with soldered constant current electronics may be connected at any voltage between 4â30 V/DC. The LED shines with almost constant brightness and has a consumption of ca.15 mA. An additional protective resistor is not required. The supplied LED can be exchanged for any other LED. It is...
Click For Info
Kemo-M142-Constant-Current-LED-Driver-Module-Kemo-M142-This-module-consists-of-an-LED-soldered-to-a-constant-current-circuit-It-can-be-connected-to-any-voltage-between-4-and-30V-DC-The-LED-shines-with-almost-constant-brightness-regardless-of-voltage-and-has-a-current-consumption-of-approx-15mA-No-ad...
Click For Info
For use with standard and low-current LEDs at operating voltage from 3 to 25 V/DC. Variable mounting of the included resistors allows you to choose between low-current or standard. The variable voltage (3 - 25 V/DC) ensurses relatively constant LED brightness.
Click For Info
The component ensures constant power supply to the LEDs. This ensures constant light intensity of the LEDs. Operating voltage 5-24 V DC/AC Maximum power consumption: 20 mA.
Click For Info
Kemo-M011N-4-Channel-Running-Light-Module-Kemo-M011N-This-4-channel-running-light-module-makes-lights-and-groups-of-lights-switch-on-and-off-sequentially-at-regular-intervals-to-create-a-running-light-effect-The-module-is-ideal-for-illuminated-advertising-in-display-windows-chains-of-lights-light-ef...
Click For Info
Kemo Power Amplifier Modules - Kemo M031N, A sturdy 3.5W amplifier module for general-purpose use as a speaker power amplifier. The module is cast, moisture-proof and vibration-proof. The casting mass and module housing are made of a special highly heat-conductive plastic which means that no...
Click For Info
Kemo-M158-Water-Sensor-Relay-Switch-Module-9-12V-DC-Kemo-M158-P-This-module-has-a-very-sensitive-input-for-a-pair-of-probes-When-the-2-probes-come-into-contact-with-water-a-relay-switches-on-which-can-be-used-to-control-sirens-lights-pumps-etc-P-P-The-water-sensors-use-an-extremely-low-voltage-in-or...
Click For Info
Kingbright LED Low Current 5mm - Kingbright L-7113LID, High efficiency low current 5mm LED from Kingbright housed in a diffused red package. Manufactured to last and incredibly reliable, while using only the best materials, including source colour devices made with Gallium Arsenide Phosphide....
Click For Info
Kingbright LED Low Current 5mm - Kingbright L-7113LYD, High efficiency low current 5mm LED from Kingbright housed in a diffused yellow package. Manufactured to last and incredibly reliable, while using only the best materials, including source colour devices made with Gallium Arsenide Phosphide....
Click For Info
Kingbright LED Low Current 5mm - Kingbright L-7113LGD, High efficiency low current 5mm LED from Kingbright housed in a diffused green package. Manufactured to last and incredibly reliable, while using only the best materials, including source colour devices made with Gallium Arsenide Phosphide....
Click For Info
Kingbright LED Low Current 5mm - Kingbright L-5A7GD-L42, High efficiency low current 5mm LED from Kingbright housed in a diffused super bright green package. Manufactured to last and incredibly reliable, while using only the best materials, including source colour devices made with Gallium Arsenide...
Click For Info
Kingbright LED Low Current 5mm - Kingbright L-7113LID, High efficiency low current 5mm LED from Kingbright housed in a diffused high efficiency red package. Manufactured to last and incredibly reliable, while using only the best materials, including source colour devices made with Gallium Arsenide...
Click For Info
Kingbright LED Low Current 5mm - Kingbright L-7113LSRD, High efficiency low current 5mm LED from Kingbright housed in a diffused super bright red package. Manufactured to last and incredibly reliable, while using only the best materials, including source colour devices made with Gallium Arsenide...
Click For Info
LM334-Adjustable-Current-Source-National-Semiconductor-LM334Z-Adjustable-current-source-shunt-topology-3-initial-accuracy-1V-to-40V-series-VREF-input-voltage-1uA-series-VREF-supply-current-10mA-shunt-current-33ppm-C-temperature-coefficient-TO-92-case-LM334-are-3-terminal-adjustable-current-sources-f...
Click For Info
Texas-Instruments-LM334Z-TO92-Adjustable-precision-power-source-Texas-Instruments-LM334Z-P-This-is-the-Texas-Instruments-LM334Z-3-terminal-adjustable-current-source-The-regulator-only-needs-one-resistor-to-set-the-output-current-No-seperate-power-supply-connections-are-needed-as-this-is-a-true-float...
Click For Info
Kingbright Low Current 3mm LEDs - Kingbright L-7104LSRD, High efficiency, low current 3mm super bright red LED from Kingbright. Luminous intensity remains consistent down to 2mA. Kingbright L-7104LSRD 3mm Super Bright Red LED Low Current
Click For Info
Kingbright Low Current 3mm LEDs - Kingbright L-7104LGD, High efficiency, low current 3mm green LED from Kingbright. Luminous intensity remains consistent down to 2mA. Kingbright L-7104LGD 3mm Green LED Low Current
Click For Info
Kingbright Low Current 3mm LEDs - Kingbright L-7104LID, High efficiency, low current 3mm red LED from Kingbright. Luminous intensity remains consistent down to 2mA. Kingbright L-7104LID 3mm Red LED Low Current
Click For Info
Kingbright Low Current 3mm LEDs - Kingbright L-7104LYD, High efficiency, low current 3mm yellow LED from Kingbright. Luminous intensity remains consistent down to 2mA. Kingbright L-7104LYD 3mm Yellow LED Low Current
Click For Info
Relpol Plug-In Protection Modules for GZT/GZM Relay Sockets - Relpol M91G, The M91G is a 6 to 24V plug-in varistor protection module that limits overvoltage on AC and DC coils and also provides LED indication of coil energisation. Relpol M91G Plug In LED & Varistor Protection Module 6-24V for GZT &...
Click For Info
Kingbright-5mm-Cool-White-LED-Low-Current-Kingbright-L-9294VR41C-CTS-C1-Kingbright-L-9294VR41C-CTS-C1-5mm-White-LED-Low-Current
Click For Info
Intended UseThe Kemo M062 module allows you to construct a safe electric fence without specialist knowledge or equipment. The module has a simple construction comprising two input voltage wires, two output voltage wires and the module itself. Using the ModuleConnect a 9-12V car type battery or...
Click For Info
Kemo-M083-12V-Lead-Acid-Battery-Charge-Regulator-Module-Kemo-M083-This-module-monitors-the-charge-status-of-a-12V-lead-acid-car-battery-and-recharges-it-automatically-when-the-voltage-falls-When-the-battery-is-full-the-module-shuts-off-the-charging-process-and-continues-to-monitor-the-battery-The-mo...
Click For Info
This tester can be used to test light emitting diodes for all kinds of function, brightness, colour and polarity. The LEDs can optionally be tested with the following currents: 1 mA, 2.5 mA, 5 mA, 10 mA, 20 mA and 50 mA. The test contact can accommodate desoldered LEDs with solder residue on their...
Click For Info
Wattage:100; Certification:CE; Material:Aluminum; Accessories Type:LED Power Source; LED Voltage(V):30-36VDC; LED Current(A):3A; IP Rating:IP67; Voltage (V):AC85-265; Features:Waterproof; Net Weight(kg):0.8
Click For Info
The Kemo M032S is a 12W universal audio amplifier that can be used in any application where an audio signal needs amplifying such as music systems, car radio, CCTV systems. The M032S has a mono phono input jack, an integrated volume control, speaker cables for the output signal and a hollow plug...
Click For Info
Wattage:50; Material:Aluminum; Accessories Type:LED Power Source; Voltage (V):AC85-265; Features:Waterproof; Net Weight(kg):0.35
Click For Info
The module monitors the battery charge status of a 12 V car battery and recharges automatically when the battery voltage sinks. When a battery is full the module shuts the charging process off and monitors the battery. Suitable for batteries in alarm systems, cottages, campers and more, in order to...
Click For Info
Switching is looped in a line of LED, in this way you can connect the LED directly to direct or alternating voltages of approx. 3 V to 20 V. Kit with detailed assembly instructions
Click For Info
Makes lights and groups of lights switch on and off successively at regular intervals. The running speed can be individually adjusted. For lit advertising in display windows, chains of lights, light effects for discos or parties and more.
Click For Info
When the 2 sensor connections come into contact with water, a relay is switched on. Thus sirens or pumps, etc. can be switched. Feature: The water sensors are charged with an extremely low voltage in order to prevent the otherwise usual oxidisation through galvanic currents.
Click For Info
Test Type:Voltage; Type:Voltage Tester; Net Dimensions(cm):4.82.92.1; Shipping Weight(kg):0.07; Net Weight(kg):0.074
Click For Info
Test Type:Voltage; Type:Voltage Tester; Net Dimensions(cm):4.82.92.1; Shipping Weight(kg):0.07; Net Weight(kg):0.074
Click For Info
This thermometer with its 13 mm LCD display can be placed anywhere where you wish to measure temperatures from -50 to +150 °C with great accuracy. The highly integrated circuit and two trim potentiometers allow precise calibration of the thermometer.
Click For Info
Kemo-M079-Flasher-Alternating-Flasher-Module-Kemo-M079-P-This-very-small-highly-integrated-flasher-module-can-directly-drive-up-to-10-light-emitting-diodes-LEDs-It-can-simultaneously-flash-one-or-several-light-emitting-diodes-or-flash-2-LEDs-or-LED-groups-alternately-The-module-is-short-circuit-proo...
Click For Info
Ready-to-use LED light module, simple installation Well cooled by waterproof aluminium casing IP65, as well as precise lens optics with a strong light power LED. Modules of same power can to be linked with each other in a series and can be operated by a constant current source Ideally for lighting...
Click For Info
Ready-to-use LED light module, simple installation Well cooled by waterproof aluminium casing IP65, as well as precise lens optics with a strong light power LED. Modules of same power can to be linked with each other in a series and can be operated by a constant current source Ideally for lighting...
Click For Info
Ready-to-use LED light module, simple installation Well cooled by waterproof aluminium casing IP65, as well as precise lens optics with a strong light power LED. Modules of same power can to be linked with each other in a series and can be operated by a constant current source Ideally for lighting...
Click For Info

