Results for fsa pf30 road bottom bracket bottom brackets

12345Next

FSA PF30 Road Bottom Bracket Bot...

For SL-K Light, Energy, Gossamer Pro, Gossamer, Assault, Vision TriMax and Omega BB30 chainset.



Click For Info
FSA PF30 Road Bottom Bracket

The FSA PF30 Road Bottom Bracket is desgined for SL-K Light, Energy, Gossamer Pro, Gossamer, Assault, Vision TriMax and Omega BB30 cranksets. FSA PF30 Road Bottom Bracket Features 46mm Inner Shell Compatibility 30mm Axle Size Compatibility 68mm Shell Size Road Use



Click For Info
FSA PF30 Road Bottom Bracket

FSA PF30 Road Bottom Bracket For SL-K Light, Energy, Gossamer Pro, Gossamer, Assault, Vision TriMax and Omega BB30 chainset. Specifications: Chrome steel BB30 cartridge bearings Weight: 84g Buy FSA PF30 Road Bottom Bracket from Chain Reaction Cycles, the World’s Largest Online Bike Store.



Click For Info
FSA PF30 Road Bottom Bracket

The FSA PF30 Road Bottom Bracket is a variant of the BB30 design, that uses BB30 bearings that are preinstalled in a bearing cups. The bearing cups out diameter is 46mm so to fit your frame the BB shell inner diameter must measure 46mm too. Comes ready with wave springs, cir-clips and nylon...



Click For Info
FSA Platinum ISIS Bottom Bracket...

All purpose, strong and stiff bottom bracket.



Click For Info
Shimano SM-BB92-41B PressFit Roa...

Complete pressfit bottom bracket assembly for Shimano HollowTech II road chainsets. The cups are made from fibre reinforced polymer material which reduces the risk of frame noise & damage. Set includes left/right hand cups, inner cover, & inner O-rings.



Click For Info
e.thirteen PF30 Bottom Bracket B...

This threaded PF30 bottom bracket adapts e.thirteen cranks with 30mm spindle to PF30 BB shells and is designed to handle the rigors of downhill or the hardest of impacts.



Click For Info
FSA BB-4000 Omega Drive MegaExo ...

The Bottom bracket is a key component to every chainset. Smoothness movement is critical, yet must be balanced by enough sealing technology to sustain a reasonable lifetime of use. FSA MegaExo bottom brackets are the result of years of development, and feature exclusive innovations to guarantee the...



Click For Info
FSA BB-7000 V-Drive MegaExo Bott...

The Bottom bracket is a key component to every chainset. Smoothness movement is critical, yet must be balanced by enough sealing technology to sustain a reasonable lifetime of use. FSA MegaExo bottom brackets are the result of years of development, and feature exclusive innovations to guarantee the...



Click For Info
Race Face PF30 \'Cinch\' 30mm Bo...

Race Face PF30 bottom bracket for use with their new ‘Cinch’ interface system. This bottom bracket allows the use of the 30mm spindle with a PressFit 30 shell.



Click For Info
FSA BB30 Road Bottom Bracket

The FSA BB30 Road Bottom Bracket is 2 bearings that are directly pressed into the frame and seated against a cir-clips that are installed into machined grooves in the bottom bracket shell. To have a BB30 compatible shell on your frame the inner diameter needs to measure 42mm and have no threads on...



Click For Info
FSA MegaEvo Road Bottom Bracket ...

The FSA MegaEvo Bottom Bracket is a thread bottom bracket that allows a 386Evo crank on a standard frame witha BSA shell. FSA MegaEvo Bottom Bracket Features 30mm Axle Compatibility 68mm Shell 386EVO Crankset Compatibility



Click For Info
FSA BB30 Road Bottom Bracket(OS6...

FSA BB30 Road Bottom Bracket(OS6000)BB30 is a design where the bearings press directly into the frame and seat against cir-clips installed in machined grooves inside the bottom bracket shell. BB30 compatible shells have a 42mm inner diameter (ID) and have no threading BB30 bearings have a30mm ID...



Click For Info
Campagnolo Centaur Tapered Botto...

Fits all years and models of Daytona, Racing Triple, Centaur, Veloce and Mirage crank sets. Also fits 1993 and later Athena and pre-1995 Record and Chorus cranks. Will NOT fit older Campagnolo Nuovo or Super Record road cranks which require a 115 mm spindle with a 5 mm drive side offset. All newer...



Click For Info
SRAM BB86 GXP PressFit Team Bott...

GXP Team Cups for 86.5mm shell bottom bracket (BB83). PressFit bottom brackets cut weight by up to 40 grams and provide easier installation by allowing you to press the bearing cups into the frame instead of threading them.



Click For Info
Rotor PressFit 4630 Bottom Brack...

You had your choice of any bike in the shop but you made your selection based on potential upgrade options. The Press Fit 4630 will easily accommodate your handpicked rig with its press fit, 46mm diameter with 30mm axle BB shell. ROTOR conceived its Universal Bottom Bracket (UBB) concept to...



Click For Info
Race Face BB92 \'Cinch\' 30mm Bo...

Race Face BB92 bottom bracket for use with their new ‘Cinch’ interface system. This bottom bracket allows the use of the 30mm spindle with Shimano PressFit shells.



Click For Info
Race Face BSA \'Cinch\' 30mm Bot...

Race Face bottom bracket for use with their new ‘Cinch’ interface system. This bottom bracket allows the use of the 30mm spindle with standard threaded BSA shell.



Click For Info
Campagnolo Record Pista Track Bo...

This Campagnolo Record Pista bottom bracket is solely designed for track bikes. The bottom bracket features an axle length of 111mm, light alloy cups (without seals) and a composite and light alloy cartridge.



Click For Info
CeramicSpeed Ceramic Bottom Brac...

Step up to a new and transformed riding experience. Stiffness, low friction and unmatched lifetime are encompassed within the excellent reliability delivered by CeramicSpeed Bottom Brackets. Adding to the high quality of the CeramicSpeed Bearings, our coated version features a coating that is 75%...



Click For Info
e.thirteen BB30 Bottom Bracket B...

The BB30 bottom bracket spaces the bearings nice and wide outside the BB shell for maximum stiffness and a threaded centre tube keeps bearings properly aligned for longer life.



Click For Info
e.thirteen BSA Threaded Bottom B...

This threaded bottom bracket adapt e.thirteen cranks with 30mm spindle to standard BSA threaded BB shells. Custom seals, grease fill and angular contact bearings are designed from the ground up for top-notch durability and smooth spinning.



Click For Info
Token Fusion Press Fit 30 Bottom...

The Fusion Press Fit 30 Bottom Bracket runs on super smooth bearings and with lightweight construction, this product from Token offers a great upgrade alternative over its main stream competitors for BB30 and BB386 frames.



Click For Info
Token Fusion Tiramic Press Fit 3...

The Fusion Tiramic Press Fit 30 Bottom Bracket runs on super smooth Tiramic bearings and with lightweight construction, this product from Token offers a great upgrade alternative over its main stream competitors for BB30 and BB386 frames.



Click For Info
Rotor UBB 4630 Steel Bottom Brac...

Rather than relying on the pressfit shell for alignment, the UBB4630\'s threaded sleeve locks both cups in place, increasing BB shell stiffness. This also ensures a smooth, uniform spin free from creaks that often plague pressfit while preventing bearing overload. The perfect alignment also means...



Click For Info
Shimano ES300 Octalink Bottom Br...

This Octalink bottom bracket is a direct replacement for the ES25 and designed to be used with Shimano Octalink chainsets. Octalink splined axle/crank arm interface results in more rigid crank assembly compared to square tapered spindle.



Click For Info
Shimano Deore HollowTech Bottom ...

Genuine Shimano HollowTech II bottom bracket assembly which includes left and right hand cups, spacers, inner cover, and inner O-rings.



Click For Info
Shimano Dura Ace BB-R9100 Bottom...

The Shimano Dura-Ace R9100 Bottom Bracket features smaller lightweight bearings and an advanced seal construction for smoother rotation and increased durability. It is designed to work in combination with the Dura-Ace R9100 crankset to offer optimum stiffness and a smoother pedal stroke.



Click For Info
Miche Primato Track Bottom Brack...

Miche's cartridge bottom bracket with sealed bearings is compatible with JIS Square Taper systems. The cups permit extensive adjustment of the chainline and feature a sealed bearing construction which provides durability and long lasting smoothness.



Click For Info
SRAM GXP Team Bottom Bracket Bot...

This SRAM GXP Team bottom bracket features their new Gutter Seal Technology & a distinctive Tungsten finish. Gutter Seal Technology drastically improves sealing against the elements while reducing seal drag thus improving it's performance over time.



Click For Info
Campagnolo Chorus Double Tapered...

Except for a few, small differences in materials, the Chorus bottom bracket, like almost all the other components in the groupset, is a clone of the Record. Maximum quality, lightness and exceptional smoothness are the hallmark of this system.



Click For Info
Tifosi Campagnolo Fit Bottom Bra...

Tifosi carbon shelled Campagnolo fit bottom bracket.



Click For Info
Race Face PF30 Bottom Bracket Bo...

The Press-fit bearing cups works like an external type headset and positions the bearings externally with exactly the same wide spacing as threaded external mountain BB's. Precision CNC machined and anodized aluminum alloy cups are more accurate, durable and stable press-fit interfaces than the...



Click For Info
Hope PressFit 46/24mm Ceramic Bo...

These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again...



Click For Info
Hope PressFit 46 Stainless Steel...

These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again...



Click For Info
Hope PressFit 46/24mm Stainless ...

These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again...



Click For Info
Race Face X-Type Fat Bike Team X...

Designed to be used with X-Type or EXI cranksets. Manufactured from high strength aluminum & featuring custom retainer bearings. FEATURES BB Cups are forged & CNC machined from 6066 aluminum. Tapering wall construction to minimize weight. Custom 6805 16 ball retainer bearing Bearings feature our...



Click For Info
Race Face Press-Fit BB92 X-Type ...

For 41mm dia Press-Fit BB shells only.



Click For Info
Token TK867 Iso Square Cromo Axl...

Iso square cromo axle with alloy forged cups and carbon body and sealed bearings Patented CNC ISO Square BB/Campagnolo Compatible.



Click For Info
Hope Stainless Steel Bottom Brac...

These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again...



Click For Info

12345Next