Results for e thirteen bb30 bottom bracket bottom brackets
The BB30 bottom bracket spaces the bearings nice and wide outside the BB shell for maximum stiffness and a threaded centre tube keeps bearings properly aligned for longer life.
Click For Info
This threaded PF30 bottom bracket adapts e.thirteen cranks with 30mm spindle to PF30 BB shells and is designed to handle the rigors of downhill or the hardest of impacts.
Click For Info
This threaded bottom bracket adapt e.thirteen cranks with 30mm spindle to standard BSA threaded BB shells. Custom seals, grease fill and angular contact bearings are designed from the ground up for top-notch durability and smooth spinning.
Click For Info
The Fusion Press Fit 30 Bottom Bracket runs on super smooth bearings and with lightweight construction, this product from Token offers a great upgrade alternative over its main stream competitors for BB30 and BB386 frames.
Click For Info
The Fusion Tiramic Press Fit 30 Bottom Bracket runs on super smooth Tiramic bearings and with lightweight construction, this product from Token offers a great upgrade alternative over its main stream competitors for BB30 and BB386 frames.
Click For Info
For SL-K Light, Energy, Gossamer Pro, Gossamer, Assault, Vision TriMax and Omega BB30 chainset.
Click For Info
The Bottom bracket is a key component to every chainset. Smoothness movement is critical, yet must be balanced by enough sealing technology to sustain a reasonable lifetime of use. FSA MegaExo bottom brackets are the result of years of development, and feature exclusive innovations to guarantee the...
Click For Info
The Bottom bracket is a key component to every chainset. Smoothness movement is critical, yet must be balanced by enough sealing technology to sustain a reasonable lifetime of use. FSA MegaExo bottom brackets are the result of years of development, and feature exclusive innovations to guarantee the...
Click For Info
The Bottom bracket is a key component to every chainset. Smoothness movement is critical, yet must be balanced by enough sealing technology to sustain a reasonable lifetime of use. FSA MegaExo bottom brackets are the result of years of development, and feature exclusive innovations to guarantee the...
Click For Info
GXP Team Cups for 86.5mm shell bottom bracket (BB83). PressFit bottom brackets cut weight by up to 40 grams and provide easier installation by allowing you to press the bearing cups into the frame instead of threading them.
Click For Info
Race Face PF30 bottom bracket for use with their new âCinchâ interface system. This bottom bracket allows the use of the 30mm spindle with a PressFit 30 shell.
Click For Info
You had your choice of any bike in the shop but you made your selection based on potential upgrade options. The Press Fit 4630 will easily accommodate your handpicked rig with its press fit, 46mm diameter with 30mm axle BB shell. ROTOR conceived its Universal Bottom Bracket (UBB) concept to...
Click For Info
Race Face BB92 bottom bracket for use with their new âCinchâ interface system. This bottom bracket allows the use of the 30mm spindle with Shimano PressFit shells.
Click For Info
Race Face bottom bracket for use with their new âCinchâ interface system. This bottom bracket allows the use of the 30mm spindle with standard threaded BSA shell.
Click For Info
This Campagnolo Record Pista bottom bracket is solely designed for track bikes. The bottom bracket features an axle length of 111mm, light alloy cups (without seals) and a composite and light alloy cartridge.
Click For Info
Step up to a new and transformed riding experience. Stiffness, low friction and unmatched lifetime are encompassed within the excellent reliability delivered by CeramicSpeed Bottom Brackets. Adding to the high quality of the CeramicSpeed Bearings, our coated version features a coating that is 75%...
Click For Info
Fits all years and models of Daytona, Racing Triple, Centaur, Veloce and Mirage crank sets. Also fits 1993 and later Athena and pre-1995 Record and Chorus cranks. Will NOT fit older Campagnolo Nuovo or Super Record road cranks which require a 115 mm spindle with a 5 mm drive side offset. All newer...
Click For Info
Rather than relying on the pressfit shell for alignment, the UBB4630\'s threaded sleeve locks both cups in place, increasing BB shell stiffness. This also ensures a smooth, uniform spin free from creaks that often plague pressfit while preventing bearing overload. The perfect alignment also means...
Click For Info
Complete pressfit bottom bracket assembly for Shimano HollowTech II road chainsets. The cups are made from fibre reinforced polymer material which reduces the risk of frame noise & damage. Set includes left/right hand cups, inner cover, & inner O-rings.
Click For Info
This Octalink bottom bracket is a direct replacement for the ES25 and designed to be used with Shimano Octalink chainsets. Octalink splined axle/crank arm interface results in more rigid crank assembly compared to square tapered spindle.
Click For Info
Genuine Shimano HollowTech II bottom bracket assembly which includes left and right hand cups, spacers, inner cover, and inner O-rings.
Click For Info
The Shimano Dura-Ace R9100 Bottom Bracket features smaller lightweight bearings and an advanced seal construction for smoother rotation and increased durability. It is designed to work in combination with the Dura-Ace R9100 crankset to offer optimum stiffness and a smoother pedal stroke.
Click For Info
Miche's cartridge bottom bracket with sealed bearings is compatible with JIS Square Taper systems. The cups permit extensive adjustment of the chainline and feature a sealed bearing construction which provides durability and long lasting smoothness.
Click For Info
This SRAM GXP Team bottom bracket features their new Gutter Seal Technology & a distinctive Tungsten finish. Gutter Seal Technology drastically improves sealing against the elements while reducing seal drag thus improving it's performance over time.
Click For Info
Except for a few, small differences in materials, the Chorus bottom bracket, like almost all the other components in the groupset, is a clone of the Record. Maximum quality, lightness and exceptional smoothness are the hallmark of this system.
Click For Info
These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again...
Click For Info
These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again...
Click For Info
These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again...
Click For Info
Designed to be used with X-Type or EXI cranksets. Manufactured from high strength aluminum & featuring custom retainer bearings. FEATURES BB Cups are forged & CNC machined from 6066 aluminum. Tapering wall construction to minimize weight. Custom 6805 16 ball retainer bearing Bearings feature our...
Click For Info
Iso square cromo axle with alloy forged cups and carbon body and sealed bearings Patented CNC ISO Square BB/Campagnolo Compatible.
Click For Info
These custom, Swiss made bearings are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers -again...
Click For Info
The Press-fit bearing cups works like an external type headset and positions the bearings externally with exactly the same wide spacing as threaded external mountain BB's. Precision CNC machined and anodized aluminum alloy cups are more accurate, durable and stable press-fit interfaces than the...
Click For Info
Genuine replacement BB30 bottom bracket cups for use with Campagnolo Athena 11 speed and Veloce 10 speed groupsets using the Power Torque chainsets.
Click For Info
The Praxis BB30 Bottom Bracket Shimano Conversion 68mm. Ok...so you have BB30, PF30 or a Specialized OSBB frame, but you need to run a Shimano crank? No worries. Our Praxis Works Conversion BB is just what you're looking for. Made to fit in either BB30 or PF30 frame, the conversion BB is designed...
Click For Info
Park BBT303 BB30 Bottom Bracket Bearing Tool Set - Designed and built to install and remove BB30 bearings (direct-fit, pressed-in bearings and a 30 mm spindle) - Tool allows the easy and safe removal of BB30 and BBright bearings - The BBT-30.3 set also includes installation cups to be used in...
Click For Info
The Hope Standard BB30 Stainless Bottom Bracket is the ideal unit for using with Shimano, Race Face, FSA and others. The custom, Swiss made bearings on this Hope bottom bracket are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are...
Click For Info
The Hope Standard BB30 Stainless Bottom Bracket is the ideal unit for using with Shimano, Race Face, FSA and others. The custom, Swiss made bearings on this Hope bottom bracket are double sealed, fully serviceable and removable which give much greater life span than stock units. The bearings are...
Click For Info


